R2511-HP MSR Router Series Layer 2 - WAN Command Reference(V5)

138
MFR configuration commands
bandwidth
Use bandwidth to set the intended bandwidth for an MFR interface.
Use undo bandwidth to restore the default.
Syntax
bandwidth bandwidth-value
undo bandwidth
Views
MFR interface view
Default command level
2: System level
Parameters
bandwidth-value: Intended bandwidth in the range of 1 to 4294967295 kbps.
Usage guidelines
You can obtain the intended bandwidth of an interface by using third-party software to query the value
of the MIB ifspeed.
The intended bandwidth of an interface is for the network management system to monitor the interface
bandwidth, and does not affect the actual bandwidth of the interface.
Examples
# Set the intended bandwidth to 1000 kbps for interface MFR 4.
<Sysname> system-view
[Sysname] interface mfr 4
[Sysname-MFR4] bandwidth 1000
display interface mfr
Use display interface mfr to display the information about an MFR interface or an MFR sub-interface,
including configuration, state, and packet statistics.
Syntax
display interface mfr {[ interface-number | interface-number.subnumber }] [ brief ] [ | { begin | exclude
| include } regular-expression ]
display interface [ mfr ] [ brief [ down ] ] [ | { begin | exclude | include } regular-expression ]
Views
Any view
Default command level
1: Monitor level
Parameters
interface-number: MFR interface number.