R2511-HP MSR Router Series Layer 2 - WAN Command Reference(V5)

147
The BIDs at both ends are used during the link bundle negotiation phase. After changing the BID of an
MFR interface, you must execute the shutdown and undo shutdown command on the interface to make
the new BID take effect.
Examples
# Set the frame relay link MFR4 BID to bundle1.
<Sysname> system-view
[Sysname] interface mfr 4
[Sysname-MFR4] mfr bundle-name bundle1
mfr fragment
Use mfr fragment to enable fragmentation on the MFR bundle.
Use undo mfr fragment to disable the function.
Syntax
mfr fragment
undo mfr fragment
Default
Fragmentation is disabled on the MFR bundle.
Views
MFR interface view
Default command level
2: System level
Examples
# Enable fragmentation on interface MFR 4.
<Sysname> system-view
[Sysname] interface mfr 4
[Sysname-MFR4] mfr fragment
mfr fragment-size
Use mfr fragment-size to configure the maximum fragment size allowed on a frame relay bundle link.
Use undo mfr fragment-size to restore the default.
Syntax
mfr fragment-size bytes
undo mfr fragment-size
Default
The maximum fragment size allowed on a frame relay bundle link is of 300 bytes.
Views
MFR interface view
Default command level
2: System level