R2511-HP MSR Router Series Layer 2 - WAN Command Reference(V5)

4
[Sysname] interface serial 2/0
[Sysname-Serial2/0] link-protocol ppp
ppp accm
Use ppp accm to configure the ACCM value sent to the peer.
Use undo ppp accm to restore the default.
Syntax
ppp accm hex-number
undo ppp accm
Default
The ACCM value sent to the peer is 0x000A0000.
Views
Interface view
Default command level
2: System level
Parameters
hex-number: ACCM value in hexadecimal format, in the range of 0 to 0xFFFFFFFF.
Usage guidelines
ACCM negotiation only applies on asynchronous links.
Examples
# Set the ACCM value sent to the peer on Serial 2/0 to 0x01010101.
<Sysname> system-view
[Sysname] interface serial 2/0
[Sysname-Serial2/0] ppp accm 01010101
ppp account-statistics enable
Use ppp account-statistics enable to enable PPP traffic statistics collection.
Use undo ppp account-statistics enable to disable PPP traffic statistics collection.
Syntax
ppp account-statistics enable [ acl { acl-number | name acl-name } ]
undo ppp account-statistics enable
Default
PPP traffic statistics collection is disabled.
Views
Interface view
Default command level
2: System level