R2511-HP MSR Router Series Layer 2 - WAN Command Reference(V5)

152
Usage guidelines
To collect statistics spanning a specific period for an interface, you must clear statistics of the interface
before starting statistics collection.
• If you do not specify mfr, this command clears the statistics of all interfaces.
• If you specify the mfr but not an interface number, this command clears the statistics of all MFR
interfaces.
• If you specify both mfr and an interface number, this command clears the statistics of the specified
MFR interface.
Examples
# Clear statistics of interface MFR 4.
<Sysname> reset counters interface mfr 4
PPPoFR and MPoFR configuration commands
display fr map-info pppofr
Use display fr map-info pppofr to display current PPPoFR mappings and their states for the specified or
all interfaces.
Syntax
display fr map-info pppofr [ interface interface-type { interface-number | interface-number.subnumber } ]
[ | { begin | exclude | include } regular-expression ]
Views
Any view
Default command level
1: Monitor level
Parameters
interface interface-type { interface-number | interface-number.subnumber }: Specifies an interface by its
type and number. It can be a main interface or subinterface. The interface-number argument is a main
interface number. The subnumber argument is a subinterface number, in the range 0 to 1023.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Examples
# Display information about current PPPoFR mappings and their states.
<Sysname> display fr map-info pppofr
Fr Interface DLCI Fr State PPP Interface PPP Phase
Serial2/0 100 down Virtual-Template1 Phase:0
Serial2/1 200 down Virtual-Template2 Phase:0