R2511-HP MSR Router Series Layer 2 - WAN Command Reference(V5)

153
Table 31 Command output
Field Descri
p
tion
Fr Interface Frame relay interface name.
DLCI DLCI number.
Fr State Frame relay state.
PPP Interface Name of the associated PPP virtual template interface.
PPP Phase Phase of the PPP session.
fr map ppp
Use fr map ppp to map the frame relay DLCI (corresponds to an Frame Relay PVC) to a PPP link, so the
PPPoFR link is established, and PPP packets can be sent/received on FR PVC. The configuration of this
PPP link depends on the configuration on the interface specified by interface virtual-template
interface-number.
Use undo fr map ppp to cancel this map, and eliminates this PPPoFR link.
Syntax
fr map ppp dlci-number interface virtual-template interface-number
undo fr map ppp [ dlci-number ]
Views
Interface view
Default command level
2: System level
Parameters
dlci-number: Specific a DLCI number, in the range 16 to 1007.
virtual-template interface-number: Specifies a virtual template interface number, in the range 0 to 1023.
Examples
# Map DLCI 100 to PPP and establish PPPoFR link on Serial 2/0.
<Sysname> system-view
[Sysname] interface serial 2/0
[Sysname-Serial2/0] fr map ppp 100 interface virtual-template 1
IPv6 frame relay configuration commands
display fr ipv6 map-info
Use display fr ipv6 map-info to display IPv6 address mappings.
Syntax
display fr ipv6 map-info { static | dynamic | all } [ interface interface-type { interface-number |
interface-number.subnumber }] [ | { begin | exclude | include } regular-expression ]