R2511-HP MSR Router Series Layer 2 - WAN Command Reference(V5)

157
Syntax
ipv6 ind holdtime seconds
undo ipv6 ind holdtime
Default
The interval is 30 seconds.
Views
Interface view
Default command level
2: System view
Parameters
seconds: Specifies the interval for sending IND solicitations, in the range of 10 to 120 seconds.
Examples
# Configure the FR interface type of Serial 2/0 as DTE, and set the interval for sending IND solicitations
to 15 seconds.
<Sysname> system-view
[Sysname] interface serial 2/0
[Sysname-Serial2/0] link-protocol fr
[Sysname-Serial2/0] fr interface-type dte
[Sysname-Serial2/0] ipv6 ind holdtime 15
ipv6 ind solicitation retrans-timer
Use ipv6 ind solicitation retrans-timer to set the interval between IND solicitation retransmissions.
Use undo ipv6 ind solicitation retrans-timer to restore the default.
Syntax
ipv6 ind solicitation retrans-timer seconds
undo ipv6 ind solicitation retrans-timer
Default
The interval between IND solicitation retransmissions is 1 second.
Views
Interface view
Default command level
2: System view
Parameters
seconds: Specifies the interval between IND solicitation retransmissions, in the range of 1 to 5 seconds.
Examples
# Configure the FR interface type of Serial2/0 as DTE, and set the interval between IND solicitation
retransmissions to 2 seconds.
<Sysname> system-view
[Sysname] interface serial 2/0