R2511-HP MSR Router Series Layer 2 - WAN Command Reference(V5)

160
Views
Dialer interface view
Default command level
2: System level
Parameters
number: Specifies the dialer bundle number in the range of 1 to 255.
Usage guidelines
This command applies only to dialer interfaces. In addition, a dialer interface can be associated with
only one dialer bundle.
Examples
# Associate dialer bundle 3 with interface Dialer 1.
<Sysname> system-view
[Sysname] interface dialer 1
[Sysname-Dialer1] dialer bundle 3
Related commands
dialer bundle-member
dialer bundle-member
Use dialer bundle-member to assign a physical interface to a dialer bundle in RS-DCC.
Use undo dialer bundle-member to remove a physical interface from a dialer bundle.
Syntax
dialer bundle-member number [ priority priority ]
undo dialer bundle-member number
Default
A dialer bundle contains no physical interface.
Views
Dialup interface (physical interface) view
Default command level
2: System level
Parameters
number: Specifies the dialer bundle number in the range of 1 to 255.
priority priority: Specifies the priority of a physical interface in the dialer bundle, in the range of 1 to 255.
The higher the number, the higher the priority. The physical interface with a higher priority is used first.
The default priority is 1.
Usage guidelines
This command applies only to physical interfaces. A physical interface can belong to multiple dialer
bundles.