R2511-HP MSR Router Series Layer 2 - WAN Command Reference(V5)

168
dialer priority
Use dialer priority to assign a priority to the physical interface in its dialer circular group in the C-DCC
approach.
Use undo dialer priority to restore the default.
Syntax
dialer priority priority
undo dialer priority
Default
The priority of a physical interface in its dialer circular group is 1.
Views
Dialup interface (physical interface) view
Default command level
2: System level
Parameters
priority: Priority of the physical interface in a dialer circular group, in the range of 1 to 127.
Usage guidelines
This command sets the order in which the available physical interfaces in a dialer circular group are used.
The physical interface with a higher priority is used first.
Examples
# Set the priority of interface Serial 2/0 in dialer circular group 1 to 5.
<Sysname> system-view
[Sysname] interface serial 2/0
[Sysname-Serial2/0] dialer circular-group 1
[Sysname-Serial2/0] dialer priority 5
Related commands
dialer circular-group
dialer queue-length
Use dialer queue-length to set the buffer queue length on the dialup interface.
Use undo dialer queue-length to restore the default.
Syntax
dialer queue-length packets
undo dialer queue-length
Default
No packets are buffered.
Views
Dialup interface (physical or dialer interface) view