R2511-HP MSR Router Series Layer 2 - WAN Command Reference(V5)

179
Idle:120 Wait-for-Carrier:60
Total Channels:1 Free Channels:1
Table 33 Command output
Field Descri
p
tion
dialer type Type of dialup interface, dialer or physical.
NextHop address Remote address associated with a dialer route on the interface.
Dialer_Numbers Dial strings for the remote IP addresses.
Dialer number Dial string for a remote IP address.
Dialer Timers(Secs) DCC timers.
Auto-dial Timer set by the dialer timer autodial command.
Compete Timer set by the dialer timer compete command.
Enable Timer set by the dialer timer enable command.
Idle Timer set by the dialer timer idle command.
Wait-for-carrier Timer set by the dialer timer wait-carrier command.
Total Channels Total number of channels on the interface.
Free Channels Number of free channels.
display interface dialer
Use display interface dialer to display the information about a dialer interface.
Syntax
display interface dialer number [ brief ] [ | { begin | exclude | include } regular-expression ]
display interface [ dialer ] [ brief [ down ] ] [ | { begin | exclude | include } regular-expression ]
Views
Any view
Default command level
1: Monitor level
Parameters
number: Dialer interface number.
brief: Displays brief interface information. If you do not specify this keyword, the command displays
detailed interface information.
down: Displays information about interfaces in the DOWN state and the causes. If you do not specify
this keyword, this command displays information about interfaces in all states.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.