R2511-HP MSR Router Series Layer 2 - WAN Command Reference(V5)

184
Default command level
2: System level
Parameters
dial-number: Dial string for a Windows NT server to place return calls to your router.
Usage guidelines
When your router is functioning as a PPP callback client, configure this command if a Windows NT
Server requires PPP callback clients to send callback numbers.
Examples
# Set the dial string for a Windows NT server to call back the router to 123 4567 .
<Sysname> system-view
[Sysname] interface dialer 1
[Sysname-Dialer1] ppp callback ntstring 1234567
Related commands
ppp callback
reset counters interface
Use reset counters interface to clear the statistics of a dialer interface.
Syntax
reset counters interface [ dialer [ number ] ]
Views
User view
Default command level
2: System level
Parameters
number: Dialer interface number. The value of this argument can be the number of any existing dialer
interface.
Usage guidelines
Before sampling network traffic within a specific period of time on an interface, you must clear the
existing statistics.
If neither dialer nor the number is specified, this command clears the statistics of all the interfaces.
If only dialer is specified, this command clears the statistics of all dialer interfaces.
If both dialer and the number are specified, this command clears the statistics of the specified dialer
interface.
Examples
# Clear the statistics of Dialer 1.
<Sysname> reset counters interface dialer 1
standby routing-group
Use standby routing-group to enable the dynamic route backup function on a dialup interface.