R2511-HP MSR Router Series Layer 2 - WAN Command Reference(V5)

222
Views
ATM main interface view
Default command level
2: System level
Parameters
max-number: Maximum number of PVCs allowed on the ATM interface. The value range varies by the
type of physical interface, as shown in Table 45.
Table 45 Maximum nu
mber of PVCs supported on an ATM interface
Interface type Maximum number Default
ADSL2+ 1 to 8 8
G.SHDSL 1 to 32 32
G.SHDSL.BIS fixed interface
(available only on MSR20-1X
routers)
1 to 8 8
ATM OC3 1 to 1024 1024
ATM E3 1 to 1024 1024
ATM T3 1 to 1024 1024
IMA 1 to 128 128
Usage guidelines
The maximum number specified in this command is the total number of the PVCs available to both ATM
main interface and the subinterfaces.
This command applies to both ATM main interface and subinterface. However, the command itself is
available only in ATM main interface view.
Examples
# Configure ATM 1/0 interface to support up to 1024 PVCs.
<Sysname> system-view
[Sysname] interface atm 1/0
[Sysname-Atm1/0] pvc max-number 1024
pvp limit
Use pvp limit to set the parameters for VP policing.
Use undo pvp limit to delete the VP policing.
Syntax
pvp limit vpi output-scr
undo pvp limit vpi
Default
VP policing is not performed.