R2511-HP MSR Router Series Layer 2 - WAN Command Reference(V5)

226
service ubr
Use service ubr to specify the service type of PVC as UBR and specify the related rate parameters.
Use undo service to restore the default.
Syntax
service ubr output-pcr
undo service
Default
The service type is UBR after a PVC creating is created.
Views
PVC view, ATM class view
Default command level
2: System level
Parameters
output-pcr: Specifies the output peak rate of an ATM cell (in kbps). For more information about the value
range, see Table 46.
Examples
# Create a PVC named aa with the VPI/VCI value of 1/101.
<Sysname> system-view
[Sysname] interface atm 1/0
[Sysname-Atm1/0] pvc aa 1/101
# Specify the service type of the PVC as UBR and the peak cell rate of ATM cell as 100000 kbps.
[Sysname-atm-pvc-Atm1/0-1/101-aa] service ubr 100000
Related commands
• service vbr-nrt
• service vbr-rt
• service cbr
service vbr-nrt
Use service vbr-nrt to specify the service type of PVC as NRT-VBR and specify the related rate
parameters.
Use undo service to restore the default.
Syntax
service vbr-nrt output-pcr output-scr output-mbs
undo service
Default
The service type is UBR after a PVC is created.
Views
PVC view, ATM class view