R2511-HP MSR Router Series Layer 2 - WAN Command Reference(V5)

232
Field Descri
p
tion
Compress/Error/Total:
Number of compressed/error packets sent and the
total number of sent packets.
hdlc compression stac
Use hdlc compression stac to enable STAC-LZ compression on the interface.
Use undo hdlc compression stac to restore the default.
Syntax
hdlc compression stac
undo hdlc compression stac
Default
No compression is enabled on an interface.
Views
Interface view
Default command level
2: System level
Examples
# Enable the STAC-LZ compression on Serial 2/0.
<Sysname> system-view
[Sysname] interface serial 2/0
[Sysname-Serial2/0] link-protocol hdlc
[Sysname-Serial2/0] hdlc compression stac
link-protocol hdlc
Use link-protocol hdlc to enable HDLC encapsulation on an interface.
Syntax
link-protocol hdlc
Default
PPP encapsulation is configured on an interface.
Views
Interface view
Default command level
2: System level
Usage guidelines
HDLC can carry the network layer protocols, such as IP and IPX.
Related commands
timer hold