R2511-HP MSR Router Series Layer 2 - WAN Command Reference(V5)

238
Usage guidelines
If you execute this command on a primary router, this command displays information about virtual circuits
established by the primary router and the virtual circuits that all the secondary routers request. If you
execute this command on a secondary router, this command displays information about the virtual
circuits that the secondary router requests and are successfully established.
Examples
# Display virtual circuit information after the Ethernet redundancy function is enabled.
<Sysname> display dlsw ethernet-backup circuit
Self 0010-c56c-8707
Remote-MAC Local-MAC RSAP LSAP
0020-357b-e065 0000-1738-6dfd 4 4
00e0-a1b2-2d82 0000-1738-6dfd 5 5
Neighbor 0020-e065-c287
Remote-MAC Local-MAC RSAP LSAP
0020-357c-e085 0000-1720-6dee 4 4
Table 50 Command output
Field Descri
p
tion
Self Local device.
Neighbor Neighbor device.
Remote-MAC MAC address of the remote SNA device.
Local-MAC MAC address of the local SNA device.
RSAP SAP of the remote SNA device.
LSAP SAP of the local SNA device.
display dlsw ethernet-backup map
Use display dlsw ethernet-backup map to display the MAC address conversion information after the
Ethernet redundancy function is enabled.
Syntax
display dlsw ethernet-backup map [ | { begin | exclude | include } regular-expression ]
Views
Any view
Default command level
1: Monitor level
Parameters
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.