R2511-HP MSR Router Series Layer 2 - WAN Command Reference(V5)

240
Self 000f.e200.0002 Master ----
Neighbor 000f.e21d.053b Slave CONNECT
Table 52 Command output
Field Descri
p
tion
Role
Device role:
• Self—Local device.
• Neighbor—Neighbor device.
Status
Device status:
• Master.
• Slave.
LLC2-Circuit
LLC2 link status:
• CONNECT—Connected.
• DISCONNECT—Disconnected.
display dlsw information
Use display dlsw information to display DLSw capabilities exchange information.
Syntax
display dlsw information [ ip-address | local ] [ | { begin | exclude | include } regular-expression ]
Views
Any view
Default command level
1: Monitor level
Parameters
ip-address: Specifies the IP address of the remote peer to display its capabilities.
local: Displays the capabilities of the local peer.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Usage guidelines
The command output describes the conditions of DLSw virtual circuits. If no peer is specified, the
command displays the capabilities of all remote peers.
Examples
# Display the capabilities of all DLSw remote peers.
<Sysname> display dlsw information
DLSw: 1.1.1.2 Vendor ID (OUI) : 00.0f.e2
Version number : 2 Release number : 0