R2511-HP MSR Router Series Layer 2 - WAN Command Reference(V5)

242
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Usage guidelines
With the ip-address argument provided, this command displays the information about the specified
remote DLSw peer.
Without the ip-address argument provided, this command displays the information about all remote
DLSw peers.
Examples
# Display information about all the current remote peers.
<Sysname> display dlsw remote
Remote peer type: D--Learning Dynamic
C--Configured by user
Total peers number:5
IP Address frame-in frame-out frame-drop port type state lifetime
*128.10.45.10 0 0 0 2065 C CONNECT 00:00:00
128.10.46.78 2 2 0 2065 C DISCONNECT 00:00:00
*130.20.45.12 2 2 0 2067 D CONNECT 00:02:00
130.35.46.77 0 0 0 2067 C DISCONNECT 00:00:00
*145.11.23.58 2 1 1 2067 C CONNECTING 00:00:00
Table 54 Command output
Field Descri
p
tion
Remote peer type
Type of the remote peer:
• D—The remote peer was dynamically learned.
• C—the remote peer was manually configured.
Total peers number Total number of remote peers.
IP address
Remote peer IP address. If preceded by an asterisk (*),
this remote peer can establish a connection.
Otherwise, this remote peer is inactive and only serves
as a backup.
frame-in
Number of frames the local peer has received from
this remote peer.
frame-out
Number of frames the local peer has sent to this
remote peer.
frame-drop
Number of frames dropped due to errors when the
local peer sent/received frames to/from this remote
peer.
port
Port number for the TCP connection:
• 2065—DLSw v1.0
• 2067—DLSw v2.0
type Type of the remote peer.
state Status of the connection.
lifetime Length of time for which the connection has been up.