R2511-HP MSR Router Series Layer 2 - WAN Command Reference(V5)

245
Table 56 Command output
Field Descri
p
tion
llc2 circuit index Index of LLC2 circuit.
Local MAC Local MAC address of LLC2 circuit.
Remote MAC Remote MAC address of LLC2 circuit.
Local Sap Local SAP address of LLC2 circuit.
Remote Sap Remote SAP address of LLC2 circuit.
Role
Local role of LLC2 circuit:
• primary—The end that initiated the circuit.
• secondary—The End that accepted the circuit
connection.
State State of the LLC2 circuit.
dlsw bridge-set
Use dlsw bridge-set to map the specified bridge set to DLSw.
Use undo dlsw bridge-set to remove mapping between the specified bridge set and DLSw.
Syntax
dlsw bridge-set bridge-set
undo dlsw bridge-set bridge-set
Default
No bridge set is mapped to DLSw.
Views
System view
Default command level
2: System level
Parameters
bridge-set: ID of the bridge set to be mapped to DLSw, in the range of 1 to 63.
Usage guidelines
To enable forwarding frames of a bridge set to the remote end over a TCP connection, you must map the
local bridge set to DLSw through this command. You can map multiple bridge sets to DLSw.
For more information about bridge set configuration, see Layer 2—WAN Configuration Guide.
Examples
# Map the bridge set by the ID of 20 connected to DLSw.
<Sysname> system-view
[Sysname] bridge enable
[Sysname] bridge 20 enable
[Sysname] dlsw bridge-set 20