R2511-HP MSR Router Series Layer 2 - WAN Command Reference(V5)

257
explorer-wait seconds: Local explorer frame waiting time in seconds. The range is 1 to 65535, and the
default is 30 seconds.
local-pending seconds: Local pending time in seconds. The range is 1 to 65535, and the default is 30
seconds.
remote-pending seconds: Remote pending time in seconds. The range is 1 to 65535, and the default is
30 seconds.
Usage guidelines
Configure the timers used in creating DLSw circuits to meet your actual needs. Do this only when
necessary.
With DLSw enabled, the remote explorer frame waiting time is used to explore and collect equivalent
remote peers.
Examples
# Configure DLSw timers as follows:
• Connection timeout period: 200 seconds
• Local explorer frame waiting time: 15 seconds
• Local pending time: 15 seconds
• Remote pending time: 25 seconds
• SNA cache address timeout period: default
• Remote explorer frame waiting time: default
<Sysname> system-view
[Sysname] dlsw timer connected 200
[Sysname] dlsw timer explorer-wait 15
[Sysname] dlsw timer local-pending 15
[Sysname] dlsw timer remote-pending 25
idle-mark
Use idle-mark to configure the idle character of the synchronous serial interface to be 0xFF.
Use undo idle-mark to restore the default.
Syntax
idle-mark
undo idle-mark
Default
The idle character of a synchronous serial interface is 0x7E (flags).
Views
Synchronous serial interface view
Default command level
2: System level
Usage guidelines
Most SDLC devices use an idle character of 0x7E (flags), but some other SDLC devices use an idle
character of 0xFF (marks). For compatibility with different types of devices, configure the router to use