R2511-HP MSR Router Series Layer 2 - WAN Command Reference(V5)

259
Views
Ethernet interface view
Default command level
2: System level
Parameters
length: Maximum number of information frames the router can receive before it sends an
acknowledgment, in the range of 1 to 127.
Examples
# Set the maximum number of information frames the router can receive before it sends an
acknowledgment to 5 on Ethernet 1/0.
<Sysname> system-view
[Sysname] interface ethernet 1/0
[Sysname-Ethernet1/0] llc2 max-ack 5
llc2 max-pdu
Use llc2 max-pdu to configure the maximum LLC2 PDU size.
Use undo llc2 max-pdu to restore the default maximum LLC2 PDU size.
Syntax
llc2 max-pdu length
undo llc2 max-pdu
Default
The maximum LLC2 PDU size is 1493 bytes.
Views
Ethernet interface view
Default command level
2: System level
Parameters
length: Maximum LLC2 PDU size in bytes, in the range of 1 to 1700.
Examples
# Set the maximum LLC2 PDU size to 1000 bytes on Ethernet 1/0.
<Sysname> system-view
[Sysname] interface ethernet 1/0
[Sysname-Ethernet1/0] llc2 max-pdu 1000
llc2 max-send-queue
Use llc2 max-send-queue to configure the length of the LLC2 output queue.
Use undo llc2 max-send-queue to restore the default.
Syntax
llc2 max-send-queue length