R2511-HP MSR Router Series Layer 2 - WAN Command Reference(V5)

263
Default
The LLC2 local acknowledgment delay time is 100 milliseconds.
Views
Ethernet interface view
Default command level
2: System level
Parameters
mseconds: LLC2 local acknowledgment delay in milliseconds. The range is 1 to 60000.
Examples
# Set the LLC2 local acknowledgment delay time to 200 milliseconds on Ethernet 1/0.
<Sysname> system-view
[Sysname] interface ethernet 1/0
[Sysname-Ethernet1/0] llc2 timer ack-delay 200
llc2 timer busy
Use llc2 timer busy to configure the LLC2 busy-station polling interval, the amount of time the router waits
before polling a busy station again.
Use undo llc2 timer busy to restore the default.
Syntax
llc2 timer busy mseconds
undo llc2 timer busy
Views
Ethernet interface view
Default command level
2: System level
Parameters
mseconds: LLC2 busy-station polling interval in milliseconds. The range is 1 to 60000. The system default
is 300 milliseconds.
Examples
# Set the LLC2 busy-station polling interval to 200 milliseconds on Ethernet 1/0.
<Sysname> system-view
[Sysname] interface ethernet 1/0
[Sysname-Ethernet1/0] llc2 timer busy 200
llc2 timer detect
Use llc2 timer detect to configure the LLC2 polling interval, the interval at which both ends of a virtual
circuit sends/receives Receiver Ready (RR) frames after the virtual circuit is established.
Use undo llc2 timer detect to restore the default.