R2511-HP MSR Router Series Layer 2 - WAN Command Reference(V5)

271
[Sysname] interface serial 2/0
[Sysname-Serial2/0] sdlc mac-map remote 000f-e200-0010 05
sdlc max-pdu
Use sdlc max-pdu to configure the maximum SDLC PDU size, the maximum size of a frame that the router
can send, not including the frame check sequence (FCS), start flag and ending flag fields.
Use undo sdlc max-pdu to restore the default.
Syntax
sdlc max-pdu number
undo sdlc max-pdu
Default
The maximum SDLC PDU size is 265 bytes.
Views
Synchronous serial interface view
Default command level
2: System level
Parameters
number: Maximum SDLC PDU size in bytes, in the range of 1 to 17,600.
Usage guidelines
The maximum PDU size of some PU2.0 devices is 265 bytes, and that of an IBM AS/400 is 521 bytes.
Typically, this maximum PDU size should be configured to be the same as on the peer SDLC device.
Examples
# Set the maximum SDLC PDU size to 521 on Serial 2/0.
<Sysname> system-view
[Sysname] interface serial 2/0
[Sysname-Serial2/0] sdlc max-pdu 521
sdlc max-send-queue
Use sdlc max-send-queue to configure the length of the SDLC output queue.
Use undo sdlc max-send-queue to restore the default.
Syntax
sdlc max-send-queue length
undo sdlc max-send-queue
Default
The length of the SDLC output queue is 50.
Views
Synchronous serial interface view