R2511-HP MSR Router Series Layer 2 - WAN Command Reference(V5)

272
Default command level
2: System level
Parameters
length: Length of the SDLC output queue, in the range of 20 to 255.
Examples
# Set the length of the SDLC output queue to 30 on Serial 2/0.
<Sysname> system-view
[Sysname] interface serial 2/0
[Sysname-Serial2/0] sdlc max-send-queue 30
sdlc max-transmission
Use sdlc max-transmission to configure the maximum number of SDLC transmission retries, the number
of times a frame is retransmitted before an acknowledgment is received from the peer.
Use undo sdlc max-transmission to restore the default.
Syntax
sdlc max-transmission retries
undo sdlc max-transmission
Default
The maximum number of SDLC transmission retries is 20.
Views
Synchronous serial interface view
Default command level
2: System level
Parameters
retries: Maximum number of SDLC transmission retries, in the range of 1 to 255.
Examples
# Set the maximum SDLC transmission retries to 30 on Serial 2/0.
<Sysname> system-view
[Sysname] interface serial 2/0
[Sysname-Serial2/0] sdlc max-transmission 30
sdlc modulo
Use sdlc modulo to configure the modulus of the SDLC.
Use undo sdlc modulo to restore the default.
Syntax
sdlc modulo { 8 | 128 }
undo sdlc modulo