R2511-HP MSR Router Series Layer 2 - WAN Command Reference(V5)

277
sdlc timer lifetime
Use sdlc timer lifetime to configure the secondary-station acknowledgment waiting time, the amount of
time a secondary SDLC station waits for an acknowledgment from the primary station after sending an
information frame.
Use undo sdlc timer lifetime to restore the default.
Syntax
sdlc timer lifetime mseconds
undo sdlc timer lifetime
Default
The secondary-station acknowledgment waiting time is 500 milliseconds.
Views
Synchronous serial interface view
Default command level
2: System level
Parameters
mseconds: Secondary-station acknowledgment waiting time in milliseconds. The range is 1 to 60000.
Examples
# Set the secondary-station acknowledgment waiting time to 1000 milliseconds on Serial 2/0.
<Sysname> system-view
[Sysname] interface serial 2/0
[Sysname-Serial2/0] sdlc timer lifetime 1000
sdlc timer poll
Use sdlc timer poll to configure the SDLC polling interval, the amount of time the primary station waits
between polling two secondary stations.
Use undo sdlc timer poll to restore the default.
Syntax
sdlc timer poll mseconds
undo sdlc timer poll
Default
SDLC polling interval is 1000 milliseconds.
Views
Synchronous serial interface view
Default command level
2: System level
Parameters
mseconds: SDLC polling interval in milliseconds. The range is 1 to 10000.