R2511-HP MSR Router Series Layer 2 - WAN Command Reference(V5)

278
Examples
# Set the SDLC polling interval to 200 milliseconds on Serial 2/0.
<Sysname> system-view
[Sysname] interface serial 2/0
[Sysname-Serial2/0] sdlc timer poll 200
sdlc window
Use sdlc window to configure the maximum number of consecutive frames the device can send before
receiving an acknowledgement from the peer.
Use undo sdlc window to restore the default.
Syntax
sdlc window length
undo sdlc window
Default
The maximum number of consecutive frames the device can send before receiving an acknowledgement
from the peer is 7.
Views
Synchronous serial interface view
Default command level
2: System level
Parameters
length: Maximum number of consecutive frames the device can send before receiving an
acknowledgement from the peer, in the range of 1 to 7.
Examples
# Set the maximum number of consecutive frames the device can send before receiving an
acknowledgement from the peer to 5 on Serial 2/0.
<Sysname> system-view
[Sysname] interface serial 2/0
[Sysname-Serial2/0] sdlc window 5
sdlc xid
Use sdlc xid to configure the XID of the SDLC.
Use undo sdlc xid to delete the XID of the SDLC.
Syntax
sdlc xid sdlc-address xid-number
undo sdlc xid sdlc-address
Default
No SDLC XID is configured on a synchronous serial interface.