R2511-HP MSR Router Series Layer 2 - WAN Command Reference(V5)

286
Examples
# Trigger the LAC to establish an L2TP tunnel.
<Sysname> system-view
[Sysname] interface virtual-template 1
[Sysname-Virtual-Template1] l2tp-auto-client enable
l2tp-group
Use l2tp-group to create an L2TP group and enter its view.
Use undo l2tp-group to remove an L2TP group.
Syntax
l2tp-group group-number
undo l2tp-group group-number
Default
No L2TP group exists.
Views
System view
Default command level
2: System level
Parameters
group-number: Number of an L2TP group, in the range of 1 to 1000.
Usage guidelines
When you use the undo l2tp-group command to remove an L2TP group, all configuration information
associated with the group will be deleted.
Examples
# Create an L2TP group numbered 2, and enter its view.
<Sysname> system-view
[Sysname] l2tp-group 2
[Sysname-l2tp2]
Related commands
• allow l2tp
• start l2tp
l2tpmoreexam enable
Use l2tpmoreexam enable to enable the L2TP multi-instance function.
Use undo l2tpmoreexam enable to disable the L2TP multi-instance function.
Syntax
l2tpmoreexam enable
undo l2tpmoreexam enable