R2511-HP MSR Router Series Layer 2 - WAN Command Reference(V5)

290
Default command level
2: System level
Parameters
string imsi-info: Configures IMSI information for the client, a case-sensitive string of 1 to 31 characters.
Examples
# Configure IMSI information as imsi1 for the client.
<Sysname> system-view
[Sysname] interface virtual-template 1
[Sysname-Virtual-Template1]ppp lcp imsi string imsi1
ppp lcp sn accept
Use ppp lcp sn accept to configure the client to accept LNS-initiated serial number (SN) negotiation
requests.
Use undo ppp lcp sn accept to restore the default.
Syntax
ppp lcp sn accept
undo ppp lcp sn accept
Default
The client rejects LNS-initiated SN negotiation requests.
Views
VT interface view
Default command level
2: System level
Examples
# Configure the client to accept LNS-initiated SN negotiation requests.
<Sysname> system-view
[Sysname] interface virtual-template 1
[Sysname-Virtual-Template1] ppp lcp sn accept
ppp lcp sn request
Use ppp lcp sn request to configure the LNS to initiate an SN negotiation request.
Use undo ppp lcp sn request to restore the default.
Syntax
ppp lcp imsi request
undo ppp lcp imsi request
Default
The LNS does not initiate an SN negotiation request.