R2511-HP MSR Router Series Layer 2 - WAN Command Reference(V5)

291
Views
VT interface view
Default command level
2: System level
Examples
# Configure the LNS to initiate an SN negotiation request.
<Sysname> system-view
[Sysname] interface virtual-template 1
[Sysname-Virtual-Template1] ppp lcp sn request
ppp lcp sn string
Use ppp lcp sn string to configure SN information for the client.
Use undo ppp lcp sn string to remove SN information from the client.
Syntax
ppp lcp sn string sn-info
undo ppp lcp sn string
Default
SN information is automatically obtained.
Views
VT interface view
Default command level
2: System level
Parameters
string sn-info: Configures SN information for the client, a case-sensitive string of 1 to 31 characters.
Examples
# Configure SN information as sn1 for the client.
<Sysname> system-view
[Sysname] interface virtual-template 1
[Sysname-Virtual-Template1]ppp lcp sn string sn1
ppp user accept-format imsi-sn split
Use ppp user accept-format imsi-sn split to specify a delimiter for the username received from the client
during negotiation.
Use undo ppp user accept-format to restore the default.
Syntax
ppp user accept-format imsi-sn split splitchart
undo ppp user accept-format