R2511-HP MSR Router Series Layer 2 - WAN Command Reference(V5)

292
Default
No delimiter is configured.
Views
VT interface view
Default command level
2: System level
Parameters
splitchart: Specifies a delimiter for the username received from the client during negotiation. The
delimiter is one character in length and can be a letter, number, or sign such as percent sign (%), pound
sign (#), or at sign (@). For example, if you set splitchart to @, the received username
imsiinfo@sninfo@username is split to imsiinfo, sninfo, and username.
Usage guidelines
If the peer's IMSI or SN information fails to be obtained during negotiation, IMSI or SN information that
is split from the username is used.
Examples
# Specify the delimiter for the username received from the client as #.
<Sysname> system-view
[Sysname] interface virtual-template 1
[Sysname-Virtual-Template1] ppp user accept-format imsi-sn split #
ppp user attach-format imsi-sn split
Use ppp user attach-format imsi-sn split to specify a delimiter for the username sent to the LNS during
negotiation.
Use undo ppp user attach-format to remove the configured delimiter.
Syntax
ppp user attach-format imsi-sn split splitchart
undo ppp user attach-format
Default
No delimiter is configured.
Views
VT interface view
Default command level
2: System level
Parameters
splitchart: Specifies a delimiter for the username sent to the LNS during negotiation. The delimiter is one
character in length and can be a letter, number, or sign such as percent sign (%), pound sign (#), or at
sign (@). For example, if you set splitchart to @, the username is sent in the format of
imsiinfo@sninfo@username.
Examples
# Specify the delimiter for the username sent to the LNS as #.