R2511-HP MSR Router Series Layer 2 - WAN Command Reference(V5)

298
Use undo tunnel flow-control to disable the L2TP tunnel flow control function.
Syntax
tunnel flow-control
undo tunnel flow-control
Default
The L2TP tunnel flow control function is disabled.
Views
L2TP group view
Default command level
2: System level
Examples
# Enable the L2TP tunnel flow control function.
<Sysname> system-view
[Sysname] l2tp-group 1
[Sysname-l2tp1] tunnel flow-control
tunnel name
Use tunnel name to specify the name of a tunnel at the local end.
Use undo tunnel name to restore the default.
Syntax
tunnel name name
undo tunnel name
Default
A tunnel takes the system name of the device as its name at the local end.
Views
L2TP group view
Default command level
2: System level
Parameters
name: Specifies the name for the tunnel at the local end, a case-sensitive string of 1 to 30 characters.
Examples
# Specify the local name for a tunnel as itsme.
<Sysname> system-view
[Sysname] l2tp-group 1
[Sysname-l2tp1] tunnel name itsme
Related commands
sysname (Fundamentals Command Reference)