R2511-HP MSR Router Series Layer 2 - WAN Command Reference(V5)

302
Views
System view
Default command level
2: System level
Parameters
seconds: Specifies the aging time of dynamic bridge table entries, in seconds, with an effective range of
10 to 1000000.
Examples
# Set the aging time of dynamic bridge table entries to 500 seconds.
<Sysname> system-view
[Sysname] bridge aging-time 500
bridge bridge-set enable
Use bridge bridge-set enable to enable a bridge set.
Use undo bridge bridge-set enable to remove a bridge set.
Syntax
bridge bridge-set enable
undo bridge bridge-set enable
Views
System view
Default command level
2: System level
Parameters
bridge-set: Specifies the bridge set number, an integer in the range of 1 to 255.
Usage guidelines
Before enabling the bridge set feature, enable bridging with the bridge enable command.
Other bridging related configurations can take effect only if the bridging and bridge set features are
enabled.
Examples
# Enable bridge set 1.
<Sysname> system-view
[Sysname] bridge 1 enable
bridge bridging
Use bridge bridging to enable bridging of the specified network layer protocols on the specified bridge
set.
Use undo bridge bridging to disable bridging of the specified network layer protocols on the specified
bridge set.