R2511-HP MSR Router Series Layer 2 - WAN Command Reference(V5)

310
Field Descri
p
tion
Flag
Flag can be any of the four values:
• P—The permit rule is used for MAC address filtering.
• N—The deny rule is used for MAC address filtering.
• D—This entry is a dynamic entry.
• S—This entry is a static entry.
Aging-time Aging time of bridge table entries.
Receive Number of received frames destined for this MAC address.
Send Number of forwarded frames destined for this MAC address.
Interface-name Outbound interface name.
display bridge information
Use display bridge information to view the information about the specified bridge set or all bridge sets.
Syntax
display bridge information [ bridge-set bridge-set ] [ | { begin | exclude | include } regular-expression ]
Views
Any view
Default command level
2: System level
Parameters
bridge-set bridge-set: Specifies the bridge set number, an integer in the range of 1 to 255.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Examples
# View the information about all bridge sets.
<Sysname> display bridge information
Bridge module is activated,2 port take part in bridge module at all;
Address table has 15 item, with 1 static one; life cycle is 300 (s).
Bridge set 1 :
configure :bridge 1 enable;
bridging ip, undo bridging ipx; bridging others;
undo routing ip, undo routing ipx;
bridge 1 learning
interface :total 2 interface(s) in the set
Ethernet1/1 : up