R2511-HP MSR Router Series Layer 2 - WAN Command Reference(V5)

311
Ethernet1/2 : up
Bridge set 2 :
configure :bridge 2 enable;
bridging ip, undo bridging ipx; bridging others;
undo routing ip, undo routing ipx;
bridge 2 learning
interface :total 2 interface(s) in the set
Ethernet1/1.1 :up
Ethernet1/1.2 :up
Table 62 Command output
Field Descri
p
tion
configure
Configuration properties of this bridge set. For example, the configuration part of
bridge set 1 indicates that bridge set 1 can bridge IP packets, not IPX packets, and
it can dynamically learn MAC addresses.
interface
Interfaces in this bridge set and their statuses, where up represents that the interface
is active, and down represents that the interface is inactive. Bridging is possible only
between active interfaces in the same bridge set.
The output shows that bridge set 1 and bridge set 2 in the system are active. The information of each
bridge set includes two parts: configure and interface.
display bridge traffic
Use display bridge traffic to display bridged traffic statistics.
Syntax
display bridge traffic [ bridge-set bridge-set | dlsw | interface interface-type interface-number ] [ |
{ begin | exclude | include } regular-expression ]
Views
Any view
Default command level
2: System level
Parameters
bridge-set bridge-set: Displays the bridged traffic statistics in the specified bridge set. This argument must
be an integer in the range of 1 to 255.
dlsw: Displays the statistics of bridged traffic that has passed the DLSw module.
interface interface-type interface-number: Displays the statistics of bridged traffic that has passed the
specified interface.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.