R2511-HP MSR Router Series Layer 2 - WAN Command Reference(V5)

312
Usage guidelines
If no parameter is provided, this command displays the bridged traffic statistics on the device.
Examples
# Display the statistics of bridged traffic that has passed Ethernet 1/1.
<Sysname> display bridge traffic interface ethernet 1/1
the statistic of interface Ethernet1/1 in bridge set 1 :
Input:
10 total, 1 bpdu, 2 single,
0 multi, 0 broadcast;
0 ip,0 ipx, 0 other protocol;
0 eth2, 0 snap,
0 dlsw, 0 other,
0 vlan;
Output:
0 total, 0 bpdu, 0 single,
0 multi, 0 broadcast;
0 ip, 0 ipx, 0 other protocol;
0 eth2, 0 snap,
0 dlsw, 0 other,
0 vlan;
Send way:
0 broadcast, 0 fast, 0 other
Discard:
0 by import state,
0 for local frame ,
0 by mac table,
0 by import filter,
0 by outport filter,
0 by ip filter ,
0 other
Table 63 Command output
Field Descri
p
tion
Input
Indicates what kinds of frames and how many frames were received on this interface.
For example, "10 total, 1 bpdu, 2 single" means that a total of 10 frames were
received on this interface, including one BPDU and two unicast packets.
Output Indicates what kinds of and how many frames were sent out of this interface.
Send way Indicates how frames were sent.
Discard Indicates why and how many frames were discarded.
0 by import state Number of frames discarded due to abnormal inbound interface state.
0 for local frame
Number of frames discarded because the source address and destination address map
to the same interface.
0 by mac table Number of frames discarded due to denied entries configured in the bridge table.
0 by import filter
Number of frames discarded due to the filtering rules configured on the inbound
interfaces.