R2511-HP MSR Router Series Layer 2 - WAN Command Reference(V5)

314
Description: Bridge-template1 Interface
The Maximum Transmit Unit is 1500
Internet Address is 2.0.0.1/30 Primary
Internet Address is 2.0.0.2/30 Sub
IP Packet Frame Type: PKTFMT_ETHNT_2, Hardware Address: 000f-e207-f301
IPv6 Packet Frame Type: PKTFMT_ETHNT_2, Hardware Address: 000f-e200-1234
Last clearing of counters: Never
Last 300 seconds input rate: 0 bytes/sec, 0 bits/sec, 0 packets/sec
Last 300 seconds output rate: 0 bytes/sec, 0 bits/sec, 0 packets/sec
0 packets input, 0 bytes, 0 drops
0 packets output, 0 bytes, 0 drops
# Display brief information about bridge-template 1.
<Sysname> display interface bridge-template 1 brief
The brief information of interface(s) under route mode:
Link: ADM - administratively down; Stby - standby
Protocol: (s) - spoofing
Interface Link Protocol Main IP Description
Bridge1 UP UP --
# Display brief information about all bridge-template interfaces in the DOWN state.
<Sysname> display interface bridge-template brief down
The brief information of interface(s) under route mode:
Link: ADM - administratively down; Stby - standby
Interface Link Cause
Bridge2 ADM Administratively
Table 64 Command output
Field Descri
p
tion
current state
Physical state of the bridge-template interface:
• UP—The interface is physically up.
• DOWN (Administratively)—The interface has been shut down with the
shutdown command and the interface is administratively down. To bring
it up, use the undo shutdown command.
Line protocol current state State of the data link layer protocol (UP/DOWN).
Description Descriptive string of the interface.
The Maximum Transmit Unit MTU of the interface.
Internet Address IP address of the interface.
IP Packet Frame Type Packet encapsulation format.
Hardware Address Hardware address (MAC address).
IPv6 Packet Frame Type IPv6 packet encapsulation formats.
Last clearing of counters: Never
Last time when the interface statistics were cleared.
Never indicates that the interface statistics have never been cleared.
Last 300 seconds input rate
Average rate at which packets are input through the current interface in the
last 300 seconds (in bytes per second, bits per second, and packets per
second).