R2511-HP MSR Router Series Layer 2 - WAN Command Reference(V5)

315
Field Descri
p
tion
Last 300 seconds output rate
Average rate at which packets are output through the current interface in the
last 300 seconds (in bytes per second, bits per second, and packets per
second).
0 packets input, 0 bytes, 0 drops
Total number and total size in bytes of input packets and the number of
dropped packets on the interface.
0 packets output, 0 bytes, 0
drops
Total number and size in bytes of output packets and the number of
dropped packets on the interface.
The brief information of
interface(s) under route mode
Brief information about Layer 3 interfaces.
Link: ADM - administratively
down; Stby - standby
Link status of the interface:
• ADM—The interface has been administratively shut down. To recover its
physical state, perform the undo shutdown command.
• Stby—The interface is operating as a backup interface. To see the
primary interface, use the display standby state command (High
Availability Command Reference).
Protocol: (s) - spoofing
If the network layer protocol state of an interface is shown as UP, but its link
is an on-demand link or not present at all, its protocol attribute includes the
spoofing flag (an s in parentheses).
Interface Abbreviated interface name.
Link
Physical link state of the interface:
• UP—The link is up.
• ADM—The link has been administratively shut down. To recover its
physical state, perform the undo shutdown command.
Protocol Protocol connection state of the interface: UP, DOWN, or UP(s).
Main IP Main IP address of the interface.
Description Description of the interface.
Cause
Cause of a DOWN physical link. If the port has been shut down with the
shutdown command, this field displays Administratively. To restore the
physical state of the interface, use the undo shutdown command.
fr map bridge
Use fr map bridge to create an FR-to-bridging mapping on the specified virtual circuit.
Use undo fr map bridge to remove an FR-to-bridging mapping.
Syntax
fr map bridge dlci broadcast
undo fr map bridge dlci
Default
No FR-to-bridging mappings exist.
Views
Interface view