R2511-HP MSR Router Series Layer 2 - WAN Command Reference(V5)

317
mac-address (bridge-template interface view)
Use mac-address to manually configure a MAC address for the current bridge-template interface.
Use undo mac-address to remove the configured MAC address of the current bridge-template interface.
Syntax
mac-address mac-address
undo mac-address
Default
If a bridge set contains Ethernet interfaces, its bridge-template interface will use the MAC address of a
random Ethernet interface. If the bridge set contains no Ethernet interfaces, its bridge-template interface
will use the system default MAC address.
NOTE:
The system default MAC address varies with device models.
Views
Bridge-template interface view
Default command level
2: System level
Parameters
mac-address: Specifies the MAC address in the format of H-H-H.
Examples
# Set the MAC address of the bridge-template interface of bridge set 1 to 0000-0011- 0 011.
<Sysname> system-view
[Sysname] interface bridge-template 1
[Sysname-Bridge-template1] mac-address 0000-0011-0011
Related commands
interface bridge-template
map bridge-group
Use map bridge-group broadcast to enable bridging over the current PVC.
Use undo map bridge-group to disable bridging over the current PVC.
Syntax
map bridge-group broadcast
undo map bridge-group
Default
Bridging over a PVC is disabled, and no mapping is configured. If you configure both the map bridge
virtual-ethernet and map bridge-group commands, only the map bridge virtual-ethernet command
takes effect.