R2511-HP MSR Router Series Layer 2 - WAN Command Reference(V5)

318
Views
PVC view
Default command level
2: System level
Examples
# Enable bridging over PVC 32/102.
<Sysname> system-view
[Sysname] interface atm 1/0
[Sysname-Atm1/0] pvc 32/102
[Sysname-atm-pvc-Atm1/0-32/102] map bridge-group broadcast
reset bridge address-table
Use reset bridge address-table to remove one or more dynamic bridge table entries.
Syntax
reset bridge address-table [ bridge-set bridge-set | dlsw | interface interface-type interface-number ]
Views
User view
Default command level
2: System level
Parameters
bridge-set bridge-set: Clears MAC address entries of the specified bridge set. The bridge-set argument
must be an integer in the range of 1 to 255.
dlsw: Clears MAC address entries of the DLSw module.
interface interface-type interface-number: Clears MAC address entry of the specified interface.
Examples
# Clear all dynamic entries about bridge set 1 from the bridge table.
<Sysname> reset bridge address-table bridge-set 1
reset bridge traffic
Use reset bridge traffic to clear the bridged traffic statistics.
Syntax
reset bridge traffic [ bridge-set bridge-set | dlsw | interface interface-type interface-number ]
Views
User view
Default command level
1: Monitor level