R2511-HP MSR Router Series Layer 2 - WAN Command Reference(V5)

320
Default
An interface is up by default.
Views
Bridge-template interface view
Default command level
2: System level
Examples
# Shut down bridge-template 1.
<Sysname> system-view
[Sysname] interface bridge-template 1
[Sysname-Bridge-template1] shutdown
x25 map bridge
Use x25 map bridge to create an X.121-to-bridging mapping.
Use undo x25 map bridge to remove an X25-to-bridging mapping.
Syntax
x25 map bridge x121-address x.121-address broadcast
undo x25 map bridge x121-address x.121-address
Default
No X.25-to-bridging mappings exist.
Views
Interface view
Default command level
2: System level
Parameters
x121-address x.121-address: Specifies the X.121 address of the peer host.
broadcast: Enables bridging of broadcasts to the X.25 destination.
Examples
# Create an X.25-to-bridging mapping on Serial 2/0.
<Sysname> system-view
[Sysname] interface serial 2/0
[Sysname-Serial2/0] link-protocol x25
[Sysname-Serial2/0] x25 x121-address 100
[Sysname-Serial2/0] x25 map bridge x121-address 20112451 broadcast
[Sysname-Serial2/0] bridge-set 1
Related commands
display x25 map