R2511-HP MSR Router Series Layer 2 - WAN Command Reference(V5)

321
EtoPPP and EtoFR configuration commands
EtoPPP configuration commands
display etoppp translate
Use display etoppp translate to display EtoPPP translation entries and translation statistics.
Syntax
display etoppp translate [ interface interface-type interface-number ] [ | { begin | exclude | include }
regular-expression ]
Views
Any view
Default command level
1: Monitor level
Parameters
interface-type interface-number: Specifies an interface by its type and number. The interface can only be
a Layer 3 Ethernet interface, Ethernet subinterface or VLAN interface.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Usage guidelines
If an interface is specified, only the entry and translation statistics for the interface are displayed. If no
interface is specified, the entire EtoPPP translation table and all translation statistics are displayed.
Examples
# Display the EtoPPP translation entry and translation statistics for interface Ethernet 1/1.
<Sysname> display etoppp translate interface ethernet 1/1
EtoPPP translate entry:
Ethernet 1/1, Status: Active
(CE) IP Address: 192.168.1.1, MAC Address: 00e0-fc00-0001
Serial 2/0, Status: Active
(PE) IP Address: 192.168.1.2
Ethernet 1/1 to Serial 2/0 translate statistics:
Translate IP packets: 100
Drop IP packets: 1
Drop Non-IP packets: 0