R2511-HP MSR Router Series Layer 2 - WAN Command Reference(V5)

325
Field Descri
p
tion
Serial 2/0 The FR interface in the EtoFR entry.
DLCI The DLCI of the used virtual circuit on the FR interface.
Status Link state of the FR interface.
(PE) IP Address Remote IP address of the FR interface.
Ethernet 1/1.1 to Serial 2/0
translate statistics
Statistics about Ethernet to FR translation for the EtoFR translation entry.
Translate IP packets Number of IP packets successfully translated.
Drop IP packets Number of IP packets dropped due to translation failure.
Drop Non-IP packets Number of dropped non-IP packets.
Serial 2/0 to Ethernet1/1.1
translate statistics
Statistics about FR to Ethernet translation for the EtoFR translation entry.
etofr translate
Use etofr translate to create an EtoFR translation mapping.
Use undo etofr translate to remove an EtoFR translation mapping.
Syntax
etofr translate interface interface-type1 interface-number1 interface-type2 interface-number2 dlci
dlci-number ip-address ip-address1 ip-address2
undo etofr translate interface-type1 interface-number1
Default
No EtoFR translation mapping exists.
Views
System view
Default command level
2: System level
Parameters
interface interface-type1 interface-number1: Specifies an interface by its type and number. It can only be
a Layer 3 Ethernet interface, Ethernet subinterface, or VLAN interface.
interface-type2 interface-number2: Specifies an interface by its type and number. It can only be a
synchronous serial interface, serial subinterface, MFR interface, MFR subinterface, POS interface, or POS
subinterface.
dlci dlci-number: DLCI assigned to a virtual circuit on the specified FR interface, in the range of 16 to
1007.
ip-address ip-address1: Specifies a remote IP address of the interface specified by interface-type1
interface-number1.
ip-address2: Specifies a remote IP address of the FR interface specified by interface-type2
interface-number2. It must be located on the same network segment as ip-address1.