R2511-HP MSR Router Series Layer 2 - WAN Command Reference(V5)

22
LCP initial
Physical is MP
Output queue : (Urgent queue : Size/Length/Discards) 0/50/0
Output queue : (Protocol queue : Size/Length/Discards) 0/500/0
Output queue : (FIFO queuing : Size/Length/Discards) 0/75/0
Last clearing of counters: Never
Last 300 seconds input rate: 0 bytes/sec, 0 bits/sec, 0 packets/sec
Last 300 seconds output rate: 0 bytes/sec, 0 bits/sec, 0 packets/sec
0 packets input, 0 bytes, 0 drops
0 packets output, 0 bytes, 0 drops
# Display brief information about interface MP-group12.
<Sysname> display interface mp-group 12 brief
The brief information of interface(s) under route mode:
Link: ADM - administratively down; Stby - standby
Protocol: (s) - spoofing
Interface Link Protocol Main IP Description
MP12 DOWN DOWN --
# Display brief information about all MP-group interfaces in DOWN state.
<Sysname> display interface mp-group brief down
The brief information of interface(s) under route mode:
Link: ADM - administratively down; Stby - standby
Interface Link Cause
MP1 ADM Administratively
MP12 DOWN Not connected
Table 1 Command output
Field Descri
p
tion
current state
Physical state of the interface:
• DOWN (Administratively)—The interface was shut down with the
shutdown command, that is, is administratively down.
• DOWN—The interface is administratively up but physically down.
• UP—The interface is both administratively and physically up.
Line protocol current state Data link layer state (UP or DOWN).
Description Description string of the interface.
The Maximum Transmit Unit MTU of the interface.
Hold timer Interval at which the current interface sends keepalive packets.
Internet protocol processing Network layer state (enabled or disabled).
LCP initial LCP negotiation is complete.
Physical Physical type of the interface.
Output queue : (Urgent queue :
Size/Length/Discards)
Output queue : (Protocol queue :
Size/Length/Discards)
Output queue : (FIFO queuing :
Size/Length/Discards)
Traffic statistics of the interface output queues.