R2511-HP MSR Router Series Layer 2 - WAN Command Reference(V5)

336
Usage guidelines
You can use this command to learn the hunt group of the router and the information about the interfaces
and XOT channel inside the hunt group.
Examples
# Display the status information of the X.25 hunt group named hg1.
<Sysname> display x25 hunt-group-info hg1
HG_ID : hg1 HG_Type: round-robin
member state vc-used in-pkts out-pkts
Serial2/1 Last used 2 51 20
Serial2/0 Next 1 21 15
1.1.1.1 Normal 1 24 3
Table 69 Command output
Field Descri
p
tion
HG_ID : hg1 The hunt group name is hg1.
HG_Type: round-robin
Hunt group call channel selection policy (including
round-robin and vc-number).
member Interfaces or XOT channel contained in hunt group.
state
State of the current interface or XOT channel:
• Last used—latest used.
• Next—next selected.
• Normal—normal state.
• Unavail—Unavailable state.
vc-used
Number of calls on the interface or XOT channel
(including call success and call failure).
in-pkts Input flow on the interface or XOT channel in packets.
out-pkts
Output flow on the interface or XOT channel in
packets.
Related commands
x25 hunt-group
display x25 map
Use display x25 map to display the X.25 address mapping table.
Syntax
display x25 map [ | { begin | exclude | include } regular-expression ]
Views
Any view
Default command level
2: System level