R2511-HP MSR Router Series Layer 2 - WAN Command Reference(V5)

337
Parameters
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Usage guidelines
You can use the x25 map command to explicitly configure the X.25 address mapping or use the x25 pvc
command to implicitly configure the X.25 address mapping. The display x25 map command can display
all the address mappings.
Examples
# Display the X.25 address mapping table.
<Sysname> display x25 map
Interface: Serial3/0(protocol status is UP)
ip 202.38.162.2 X.121 address:22
map-type: SVC_MAP VC-number: 0
Facility:
ACCEPT_REVERSE;
BROADCAST;
PACKET_SIZE: I 512 O 512
Table 70 Command output
Field Descri
p
tion
Interface:Serial3/0(protocol status is UP) Interface name and protocol status.
ip 202.38.162.2 X.121 address:22 IP address and X.121 address of the interface.
map-type: SVC_MAP Mapping type.
VC-number: 0 Virtual circuit number.
Facility: User facility of the interface.
display x25 pad
Use display x25 pad to display X.25 PAD connection information.
Syntax
display x25 pad [ pad-id ] [ | { begin | exclude | include } regular-expression ]
Views
Any view
Default command level
2: System level
Parameters
pad-id: X.25 PAD connection (packet assembly/disassembly facility). The ID is in the range 0 to 255.