R2511-HP MSR Router Series Layer 2 - WAN Command Reference(V5)

341
Syntax
display x25 vc [ lci ] [ | { begin | exclude | include } regular-expression ]
Views
Any view
Default command level
2: System level
Parameters
lci: Logical channel identifier in the range 1 to 4095. If not specified, all VCs will be displayed.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Usage guidelines
If no logical channel identifier is specified, this command displays the information about all virtual
circuits.
The virtual circuits include the following types:
• SVC is set up temporarily by X.25 through calling when data transmission is required.
• PVC is configured manually and exists regardless of the data transmission requirement.
• When the device operates in X.25 switching mode, virtual circuits will be set up in order to transfer
data.
Information about these types of virtual circuits can be shown with this command, and only some fields
of their outputs differ.
Examples
# Display X.25 virtual circuit information.
<Sysname> display x25 vc
Interface: Serial2/0
SVC 1
State: P4(transmit)
Map: ip 10.1.1.2 to 130
Window size: input 2 output 2
Packet Size: input 128 output 128
Local PS: 5 Local PR: 5 Remote PS: 5 Remote PR: 4
Local Busy: FALSE Reset times: 0
Input/Output:
DATA 5/5 INTERRUPT 0/0
RR 0/0 RNR 0/0 REJ 0/0
Bytes 420/420
Send Queue(Current/Max): 0/200
Interface: Serial2/1/0
SVC 10