R2511-HP MSR Router Series Layer 2 - WAN Command Reference(V5)

346
pad
Use pad to establish a X.25 PAD connection and logon to the remote site.
Syntax
pad x121-address
Views
User view
Default command level
2: System level
Parameters
x121-address: Destination X.121 address, a string of 1 to 15 numerical characters.
Usage guidelines
PAD is similar to Telnet. It can establish the connection from the local to the remote through the remote
X121 address to carry out configuration operations.
Examples
# Establish a PAD connection to the destination X.121 address 2.
<Sysname> pad 2
reset x25 counters
Use reset x25 counters to reset X.25 protocol statistics for the specified interface.
Syntax
reset x25 counters interface interface-type interface-number
Views
User view
Default command level
1: Monitor level
Parameters
interface interface-type interface-number: Specifies an interface by its type and number.
Examples
# Clear the X.25 statistics for interface Serial 2/0.
<Sysname> reset x25 counters interface serial 2/0
reset x25 vc
Use reset x25 vc to clear X.25 virtual circuits on the specified interface.
Syntax
reset x25 vc interface interface-type interface-number [ vc-number ]
Views
User view