R2511-HP MSR Router Series Layer 2 - WAN Command Reference(V5)

352
O
p
tion Descri
p
tion
send-delay delay-time
Carries out the maximum network send delay negotiation when initiating
calls from the X.25 interface. The delay time is in the range 0 to 65534
ms.
threshold input-value output-value
Specifies throughput negotiation values for initiating calls from the X.25
interface. The values of input/output can only be 75, 150, 300, 600,
1200, 2400, 4800, 9600, 19200, and 48000.
window-size input-window-size
output-window-size
Carries out the window size negotiation when initiating calls from the
X.25 interface. Window size negotiation is a part of flow control
negotiation. It needs the following parameters: input window size and
output window size. When the modulo is 8, the size is in the range 1 to
7. When the modulo is 128, it is in the range 1 to 127.
Usage guidelines
The user facilities set by using this command are available for all the calls originating from this X.25
interface. You can also use the optional parameter option of the x25 map command to set user facility
option for the X.25 call originating from a specific address map. What's more, the priority of user facility
configured with the x25 map command is higher than that configured with the x25 call-facility
command.
Examples
# Specify the flow control negotiation with the peer end for the calls from the X.25 interface serial 2/0.
<Sysname> system-view
[Sysname] interface serial 2/0
[Sysname-Serial2/0] x25 call-facility packet-size 512 512
[Sysname-Serial2/0] x25 call-facility window-size 5 5
Related commands
• x25 map
• x25 modulo
x25 cug-service
Use x25 cug-service to enable CUG service and suppression policies.
Use undo x25 cug-service to disable CUG service.
Syntax
x25 cug-service [ incoming-access | outgoing-access | suppress { all | preferential } ] *
undo x25 cug-service
Default
CUG service is disabled.
Views
Interface view
Default command level
2: System level