R2511-HP MSR Router Series Layer 2 - WAN Command Reference(V5)

358
Examples
# Define the rule on the serial interface Serial 2/0: the incoming calls with 100 local CUGs or 200
network CUGs are denied.
<Sysname> system-view
[Sysname] interface serial 2/0
[Sysname-Serial2/0] x25 cug-service
[Sysname-Serial2/0] x25 local-cug 100 network-cug 200 no-incoming
Related commands
• x25 call-facility
• x25 cug-service
x25 map
Use x25 map to set the address mapping between IP address and X.121 address.
Use undo x25 map to delete a mapping.
Syntax
x25 map protocol-type protocol-address x121-address x.121-address [ option ]
undo x25 map { ip | compressedtcp } protocol-address
Default
No address mapping is set.
Views
Interface view
Default command level
2: System level
Parameters
protocol-type: Protocol type, with ip (IP protocol), compressedtcp (IP protocol supporting TCP header
compression), or both. If you want to configure both of them, make sure that the protocol-address are
same for both ip and compressedtcp. The compressedtcp requires correct configuration for all the link
ends, otherwise, the link might be blocked.
protocol-address: Network protocol address of the peer host.
x121-address x.121-address: Specifies the X.121 address of the peer host.
option: Specifies some attributes or user facilities for the address mapping.
Table 77 Description on the attributes or user facilities of X.25 address mapping
O
p
tion Descri
p
tion
broadcast
Sends broadcasts of network protocol and multicasts of IP to the
destination. This option provides support for some routing protocols (such
as Routing Information Protocol).
closed-user-group group number Specifies a CUG number for the X.25 interface, in the range 0 to 9999.
compress Compresses X.25 payloads.