R2511-HP MSR Router Series Layer 2 - WAN Command Reference(V5)

365
Related commands
x25 window-size
x25 remove-facility
Use x25 remove-facility to enable the user facility removing function.
Use undo x25 remove-facility to disable the user facility removing function.
Syntax
x25 remove-facility
undo x25 remove-facility
Default
The user facility removing function is disabled.
Views
Interface view
Default command level
2: System level
Usage guidelines
This command is applicable to only the outgoing packets on main interfaces. With the command, a main
interface checks outgoing call-setup negotiation packets for the window size and maximum packet size
fields. If the two fields are not carried, the packets are not processed. If the two fields are carried, they
are removed before the packets are sent out.
Examples
# Enable the user facility removing function on interface Serial 2/0.
<Sysname> system-view
[Sysname] interface serial 2/0
[Sysname-Serial2/0] link-protocol x25 dce ietf
[Sysname-Serial2/0] x25 remove-facility
x25 response called-address
Use x25 response called-address to enable X.25 call reception packets to carry the address information
of the called DTE.
Use undo x25 response called-address to disable the function.
Syntax
x25 response called-address
undo x25 response called-address
Default
This function is disabled.
Views
Interface view