R2511-HP MSR Router Series Layer 2 - WAN Command Reference(V5)

367
Related commands
• x25 response called-address
• x25 ignore called-address
• x25 ignore calling-address
x25 reverse-charge-accept
Use x25 reverse-charge-accept to enable this interface to accept the call with the reverse charging
request user facility.
Use undo x25 reverse-charge-accept to disable this function.
Syntax
x25 reverse-charge-accept
undo x25 reverse-charge-accept
Default
This function is disabled.
Views
Interface view
Default command level
2: System level
Usage guidelines
This function does not affect any call without "reverse charging request."
If you enable this function on an X.25 interface, all these calls that reach the interface will be accepted.
If you enable this function for a certain address mapping by the option reverse-charge-accept in the x25
map command, only such calls that reach the interface and map this address will be accepted, and other
calls (carrying reverse charging request and not mapping this address) will be cleared.
Examples
# Enable Serial 2/0 to accept the call with the reverse charging request user facility.
<Sysname> system-view
[Sysname] interface serial 2/0
[Sysname-Serial2/0] x25 reverse-charge-accept
Related commands
x25 map
x25 roa-list
Use x25 roa-list to define ROA list.
Use undo x25 roa-list to delete ROA list items.
Syntax
x25 roa-list roa-name roa-id&<1-10>
undo x25 roa-list roa-name