R2511-HP MSR Router Series Layer 2 - WAN Command Reference(V5)

377
Syntax
x25 timer tx0 seconds
undo x25 timer tx0
Default
The restart timer on the X.25 DTE is 180 seconds and that on the DCE is 60 seconds.
Views
Interface view
Default command level
2: System level
Parameters
seconds: X.25 restart timer in seconds. It ranges 1 to 1000.
Usage guidelines
According to X.25, a timer should be started when the DTE sends a restart request (or a DCE sends a
restart indication). If no peer acknowledgement is received after the timer timeout, the sending end will
take some measures to guarantee the normal proceeding of the local procedure. This parameter
specifies the time of this timer.
Examples
# Set the restart timer to 120 seconds on the X.25 interface Serial 2/0.
<Sysname> system-view
[Sysname] interface serial 2/0
[Sysname-Serial2/0] x25 timer tx0 120
Related commands
• x25 timer tx1
• x25 timer tx2
• x25 timer tx3
x25 timer tx1
Use x25 timer tx1 to set calling request (indication) sending timer for the DTE (or DCE).
Use undo x25 timer tx1 to restore the default.
Syntax
x25 timer tx1 seconds
undo x25 timer tx1
Default
The timer time on a DTE is 200 seconds, and that on a DCE is 180 seconds.
Views
Interface view
Default command level
2: System level